Mission Darkness™ Exodus EMP Faraday Motorcycle Cover For Cheap
Description
Please Note: 3-4 Week Lead Time
This product is made to order, and may require up to 4 weeks lead time. Contact us prior to purchasing if you require special sizing modifications to fit your vehicle. Additionally, this product does not qualify for free domestic shipping.
Mission Darkness™ Exodus EMP Faraday Motorcycle Cover
SKU: MDFB-MOTORCYCLE
{
__shgImageElements : { uuid : s-64b8051e-39ff-4036-ae60-a54ea61f8e6d }
}
The Mission Darkness™ Exodus EMP Faraday Motorcycle Cover is an extremely large tent-style faraday enclosure specifically designed for shielding motorcycles and small vehicles with electric components from a high-altitude electromagnetic pulse (HEMP EMP), coronal mass ejection (CME), or related occurrences. The high-shielding properties of the cover direct damaging electromagnetic fields away from highly sensitive electrical components (such as those incorporated into vehicles), thus protecting their working structure. It s constructed with two layers of TitanRF™ Faraday Fabric with no exposed stitching (no holes) and 100% continuous planes. The material has been lab tested and certified compliant for MIL-STD-188-125, High-Altitude Electromagnetic Protection for Ground Based C4I Facilities. The results ensure that the material surpasses military shielding requirements to handle natural or man-made EMPs (*see testing details below).
In the case of a HEMP EMP or CME, everything from electrical infrastructure on a national level to personal electronics could be destroyed, which is why it’s imperative to shield irreplaceable and survival electronics, including electric vehicles. The large interior space can accommodate a range of small vehicles, including motorcycles, electric bicycles, scooters, golf carts, ATVs, commercial generators on trailers, electric tools and machinery. The tall height of 7 (2.1m) at its top peak allows the user to comfortably stand under the cover as they wheel the vehicle inside.
The cover includes a sturdy heavy-weight frame constructed out of 1.5 (3.8cm) heavy gauge steel and metal corner joints so that the structure is stable and safe. A single piece contoured faraday cover fits snugly over the top and side walls, giving the tent a tight fit around the frame. The top cover drapes over the faraday floor base, creating a fully enclosed faraday chamber, that effectively blocks radio frequency (RF) signals. Once the vehicle is securely stored inside, a weighted object [such as 2 x 4 (5.1cm x 10.2cm) wood planks; not included] should be placed over the exterior rim to apply pressure to the RF blocking seal. Vehicles can be accessed as needed, simply by removing the planks and lifting up the top cover piece.
We made the Exodus EMP Faraday Motorcycle Cover because all other options on the market were 3-5 times more expensive, not readily available, had long lead times, were heavy, and impractical for most uses. This faraday tent is easy to install, accommodates a range of vehicles, and successfully blocks RF signals, providing peace of mind knowing that your vehicle is protected.
To learn more, read the blog post about EMP-proofing your vehicles and watch the video demonstration to see the product installed.
EMP-Proofing Your Vehicles Blog Post
{
__shgImageElements : { uuid : s-d9a50e78-2f2f-4528-b85e-acaeb02b4756 }
}
{
__shgImageElements : { uuid : s-b0550d2a-2c91-4dae-8971-5ec4f0695fad }
}
{
__shgImageElements : { uuid : s-e79af45b-6d9a-408d-91b4-cb6bcfb4397f }
}
Features
- Military-grade faraday enclosure specifically designed for shielding motorcycles, electric bicycles, and small vehicles from HEMPs EMPs, CMEs, and RF signals
-
- Can also be used for shielding extra-large electronics such as satellites, commercial generators, solar panels, and survival equipment
-
- Constructed with two layers of high-shielding TitanRF Faraday Fabric on all sides (TitanRF Faraday Fabric is lab tested and certified to shielding effectiveness standards MIL STD 188-125 and IEEE 299-2006)
-
- Blocks WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, and radio signals from low MHz to 40GHz
-
- EMI, EMR, and EMF shielding
-
- Seamless construction reduces the risk of ripping from hard pulls (compared to covers made with stitched seams)
-
- Separate top and bottom layers allows user to easily access vehicle as needed
-
- Heavy-duty rubber floor mat protects cover from vehicle wheel abrasion and grime
-
- 1.5 (3.8cm) heavy gauge powder-coated steel frame with metal corner joints provides structure stability and resists chipping, peeling, rust, and corrosion
-
- Includes TitanRF Faraday Tape and Patches to repair any damage
-
- Assembled in the USA
-
Applications
- Protection against damaging effects of a high-altitude electromagnetic pulse (HEMP EMP), coronal mass ejection (CME), or related occurrences
-
- Signal-proof tent for state, local, federal, and military forensics
-
- Signal isolation for software and hardware testing
-
- Data security and digital privacy
-
- EMI RFI reduction
-
Dimensions
- Interior dimensions of the tent once assembled: 8 L x 6 W x 7 H *at the top peak (2.44m x 1.83m x 2.13m)
-
- Exterior faraday floor base (space required): 10 L x 8 W (3.05m x 2.44m)
-
If you require a larger vehicle cover, check out the Mission Darkness Exodus EMP Faraday Car Cover or contact us for a custom quote.
Exodus EMP Faraday Car Cover
Usage Warning
Special precautions should be taken when inserting the vehicle into the Exodus EMP Faraday Motorcycle Cover. We do not recommend removing the cover frequently (as one might do with a standard unshielded vehicle cover), to reduce the chance of the delicate shielding material (TitanRF Faraday Fabric) becoming tarnished or ripped. The expectation is that a spare vehicle (such as an irreplaceable motorcycle with electric components or emergency doomesday vehicle), will be stored inside indefinitely, opposed to being removed on a regular basis.
DO NOT IDLE GAS VEHICLE ENGINE WHILE INSIDE THE COVER! Only allow vehicle to be turned on for a very short time to slowly and carefully drive it inside the cover. Make sure the opening is expanded to allow ventilation during that brief period.
Do not run any cables through the cover or between the bottom and top layers. Additionally, the rubber floor mat should not go between the bottom and top layers (must remain completely inside of the tent frame). An obtruding object will break the faraday seal, and allow RF signals to penetrate the tent.
The cover should always remain indoors in a dry and protected environment, such as a garage, since it s constructed out of TitanRF Faraday Fabric and does not include additional waterproof weatherproof layers.
{
__shgImageElements : { uuid : s-9d20712d-50cf-463e-acfc-5b4b45891a3d }
}
{
__shgImageElements : { uuid : s-d100d9d1-fc8a-46ab-bfa4-65e986438dc5 }
}
Installation consists of laying the faraday floor base, assembling the metal frame, covering the frame with the fitted top piece faraday cover, then laying a long, flat, weighted object (like wooden planks) around the exterior base rim.
{
__shgImageElements : { uuid : s-7d18eb78-d5cd-4b7b-86d4-1541b69ebea3 }
}
The frame is built out of 1.5 (3.8cm) heavy gauge powder-coated steel with metal corner joints.
{
__shgImageElements : { uuid : s-2b5527ed-4564-449a-8246-ec6f41f9209c }
}
Pole clamps can be used to hold the cover up at a desired height while inserting or removing vehicles.
{
__shgImageElements : { uuid : s-8307af40-1507-4237-8582-4d235f4d907b }
}
{
__shgImageElements : { uuid : s-b6880292-d39c-4e11-ae81-ec43adcfb60e }
}
SKU: MDFB-MOTORCYCLE
{
__shgImageElements : { uuid : s-64b8051e-39ff-4036-ae60-a54ea61f8e6d }
}
The Mission Darkness™ Exodus EMP Faraday Motorcycle Cover is an extremely large tent-style faraday enclosure specifically designed for shielding motorcycles and small vehicles with electric components from a high-altitude electromagnetic pulse (HEMP EMP), coronal mass ejection (CME), or related occurrences. The high-shielding properties of the cover direct damaging electromagnetic fields away from highly sensitive electrical components (such as those incorporated into vehicles), thus protecting their working structure. It s constructed with two layers of TitanRF™ Faraday Fabric with no exposed stitching (no holes) and 100% continuous planes. The material has been lab tested and certified compliant for MIL-STD-188-125, High-Altitude Electromagnetic Protection for Ground Based C4I Facilities. The results ensure that the material surpasses military shielding requirements to handle natural or man-made EMPs (*see testing details below).
In the case of a HEMP EMP or CME, everything from electrical infrastructure on a national level to personal electronics could be destroyed, which is why it’s imperative to shield irreplaceable and survival electronics, including electric vehicles. The large interior space can accommodate a range of small vehicles, including motorcycles, electric bicycles, scooters, golf carts, ATVs, commercial generators on trailers, electric tools and machinery. The tall height of 7 (2.1m) at its top peak allows the user to comfortably stand under the cover as they wheel the vehicle inside.
The cover includes a sturdy heavy-weight frame constructed out of 1.5 (3.8cm) heavy gauge steel and metal corner joints so that the structure is stable and safe. A single piece contoured faraday cover fits snugly over the top and side walls, giving the tent a tight fit around the frame. The top cover drapes over the faraday floor base, creating a fully enclosed faraday chamber, that effectively blocks radio frequency (RF) signals. Once the vehicle is securely stored inside, a weighted object [such as 2 x 4 (5.1cm x 10.2cm) wood planks; not included] should be placed over the exterior rim to apply pressure to the RF blocking seal. Vehicles can be accessed as needed, simply by removing the planks and lifting up the top cover piece.
We made the Exodus EMP Faraday Motorcycle Cover because all other options on the market were 3-5 times more expensive, not readily available, had long lead times, were heavy, and impractical for most uses. This faraday tent is easy to install, accommodates a range of vehicles, and successfully blocks RF signals, providing peace of mind knowing that your vehicle is protected.
To learn more, read the blog post about EMP-proofing your vehicles and watch the video demonstration to see the product installed.
EMP-Proofing Your Vehicles Blog Post
{
__shgImageElements : { uuid : s-d9a50e78-2f2f-4528-b85e-acaeb02b4756 }
}
{
__shgImageElements : { uuid : s-b0550d2a-2c91-4dae-8971-5ec4f0695fad }
}
{
__shgImageElements : { uuid : s-e79af45b-6d9a-408d-91b4-cb6bcfb4397f }
}
Features
- Military-grade faraday enclosure specifically designed for shielding motorcycles, electric bicycles, and small vehicles from HEMPs EMPs, CMEs, and RF signals
-
- Can also be used for shielding extra-large electronics such as satellites, commercial generators, solar panels, and survival equipment
-
- Constructed with two layers of high-shielding TitanRF Faraday Fabric on all sides (TitanRF Faraday Fabric is lab tested and certified to shielding effectiveness standards MIL STD 188-125 and IEEE 299-2006)
-
- Blocks WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, and radio signals from low MHz to 40GHz
-
- EMI, EMR, and EMF shielding
-
- Seamless construction reduces the risk of ripping from hard pulls (compared to covers made with stitched seams)
-
- Separate top and bottom layers allows user to easily access vehicle as needed
-
- Heavy-duty rubber floor mat protects cover from vehicle wheel abrasion and grime
-
- 1.5 (3.8cm) heavy gauge powder-coated steel frame with metal corner joints provides structure stability and resists chipping, peeling, rust, and corrosion
-
- Includes TitanRF Faraday Tape and Patches to repair any damage
-
- Assembled in the USA
-
Applications
- Protection against damaging effects of a high-altitude electromagnetic pulse (HEMP EMP), coronal mass ejection (CME), or related occurrences
-
- Signal-proof tent for state, local, federal, and military forensics
-
- Signal isolation for software and hardware testing
-
- Data security and digital privacy
-
- EMI RFI reduction
-
Dimensions
- Interior dimensions of the tent once assembled: 8 L x 6 W x 7 H *at the top peak (2.44m x 1.83m x 2.13m)
-
- Exterior faraday floor base (space required): 10 L x 8 W (3.05m x 2.44m)
-
If you require a larger vehicle cover, check out the Mission Darkness Exodus EMP Faraday Car Cover or contact us for a custom quote.
Exodus EMP Faraday Car Cover
Usage Warning
Special precautions should be taken when inserting the vehicle into the Exodus EMP Faraday Motorcycle Cover. We do not recommend removing the cover frequently (as one might do with a standard unshielded vehicle cover), to reduce the chance of the delicate shielding material (TitanRF Faraday Fabric) becoming tarnished or ripped. The expectation is that a spare vehicle (such as an irreplaceable motorcycle with electric components or emergency doomesday vehicle), will be stored inside indefinitely, opposed to being removed on a regular basis.
DO NOT IDLE GAS VEHICLE ENGINE WHILE INSIDE THE COVER! Only allow vehicle to be turned on for a very short time to slowly and carefully drive it inside the cover. Make sure the opening is expanded to allow ventilation during that brief period.
Do not run any cables through the cover or between the bottom and top layers. Additionally, the rubber floor mat should not go between the bottom and top layers (must remain completely inside of the tent frame). An obtruding object will break the faraday seal, and allow RF signals to penetrate the tent.
The cover should always remain indoors in a dry and protected environment, such as a garage, since it s constructed out of TitanRF Faraday Fabric and does not include additional waterproof weatherproof layers.
{
__shgImageElements : { uuid : s-9d20712d-50cf-463e-acfc-5b4b45891a3d }
}
{
__shgImageElements : { uuid : s-d100d9d1-fc8a-46ab-bfa4-65e986438dc5 }
}
Installation consists of laying the faraday floor base, assembling the metal frame, covering the frame with the fitted top piece faraday cover, then laying a long, flat, weighted object (like wooden planks) around the exterior base rim.
{
__shgImageElements : { uuid : s-7d18eb78-d5cd-4b7b-86d4-1541b69ebea3 }
}
The frame is built out of 1.5 (3.8cm) heavy gauge powder-coated steel with metal corner joints.
{
__shgImageElements : { uuid : s-2b5527ed-4564-449a-8246-ec6f41f9209c }
}
Pole clamps can be used to hold the cover up at a desired height while inserting or removing vehicles.
{
__shgImageElements : { uuid : s-8307af40-1507-4237-8582-4d235f4d907b }
}
{
__shgImageElements : { uuid : s-b6880292-d39c-4e11-ae81-ec43adcfb60e }
}
__shgImageElements : { uuid : s-64b8051e-39ff-4036-ae60-a54ea61f8e6d }
}
The Mission Darkness™ Exodus EMP Faraday Motorcycle Cover is an extremely large tent-style faraday enclosure specifically designed for shielding motorcycles and small vehicles with electric components from a high-altitude electromagnetic pulse (HEMP EMP), coronal mass ejection (CME), or related occurrences. The high-shielding properties of the cover direct damaging electromagnetic fields away from highly sensitive electrical components (such as those incorporated into vehicles), thus protecting their working structure. It s constructed with two layers of TitanRF™ Faraday Fabric with no exposed stitching (no holes) and 100% continuous planes. The material has been lab tested and certified compliant for MIL-STD-188-125, High-Altitude Electromagnetic Protection for Ground Based C4I Facilities. The results ensure that the material surpasses military shielding requirements to handle natural or man-made EMPs (*see testing details below).
In the case of a HEMP EMP or CME, everything from electrical infrastructure on a national level to personal electronics could be destroyed, which is why it’s imperative to shield irreplaceable and survival electronics, including electric vehicles. The large interior space can accommodate a range of small vehicles, including motorcycles, electric bicycles, scooters, golf carts, ATVs, commercial generators on trailers, electric tools and machinery. The tall height of 7 (2.1m) at its top peak allows the user to comfortably stand under the cover as they wheel the vehicle inside.
The cover includes a sturdy heavy-weight frame constructed out of 1.5 (3.8cm) heavy gauge steel and metal corner joints so that the structure is stable and safe. A single piece contoured faraday cover fits snugly over the top and side walls, giving the tent a tight fit around the frame. The top cover drapes over the faraday floor base, creating a fully enclosed faraday chamber, that effectively blocks radio frequency (RF) signals. Once the vehicle is securely stored inside, a weighted object [such as 2 x 4 (5.1cm x 10.2cm) wood planks; not included] should be placed over the exterior rim to apply pressure to the RF blocking seal. Vehicles can be accessed as needed, simply by removing the planks and lifting up the top cover piece.
We made the Exodus EMP Faraday Motorcycle Cover because all other options on the market were 3-5 times more expensive, not readily available, had long lead times, were heavy, and impractical for most uses. This faraday tent is easy to install, accommodates a range of vehicles, and successfully blocks RF signals, providing peace of mind knowing that your vehicle is protected.
To learn more, read the blog post about EMP-proofing your vehicles and watch the video demonstration to see the product installed.
__shgImageElements : { uuid : s-d9a50e78-2f2f-4528-b85e-acaeb02b4756 }
}
__shgImageElements : { uuid : s-b0550d2a-2c91-4dae-8971-5ec4f0695fad }
}
__shgImageElements : { uuid : s-e79af45b-6d9a-408d-91b4-cb6bcfb4397f }
}
Features
- Military-grade faraday enclosure specifically designed for shielding motorcycles, electric bicycles, and small vehicles from HEMPs EMPs, CMEs, and RF signals
-
- Can also be used for shielding extra-large electronics such as satellites, commercial generators, solar panels, and survival equipment
-
- Constructed with two layers of high-shielding TitanRF Faraday Fabric on all sides (TitanRF Faraday Fabric is lab tested and certified to shielding effectiveness standards MIL STD 188-125 and IEEE 299-2006)
-
- Blocks WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, and radio signals from low MHz to 40GHz
-
- EMI, EMR, and EMF shielding
-
- Seamless construction reduces the risk of ripping from hard pulls (compared to covers made with stitched seams)
-
- Separate top and bottom layers allows user to easily access vehicle as needed
-
- Heavy-duty rubber floor mat protects cover from vehicle wheel abrasion and grime
-
- 1.5 (3.8cm) heavy gauge powder-coated steel frame with metal corner joints provides structure stability and resists chipping, peeling, rust, and corrosion
-
- Includes TitanRF Faraday Tape and Patches to repair any damage
-
- Assembled in the USA
-
Applications
- Protection against damaging effects of a high-altitude electromagnetic pulse (HEMP EMP), coronal mass ejection (CME), or related occurrences
-
- Signal-proof tent for state, local, federal, and military forensics
-
- Signal isolation for software and hardware testing
-
- Data security and digital privacy
-
- EMI RFI reduction
-
Dimensions
- Interior dimensions of the tent once assembled: 8 L x 6 W x 7 H *at the top peak (2.44m x 1.83m x 2.13m)
-
- Exterior faraday floor base (space required): 10 L x 8 W (3.05m x 2.44m)
-
If you require a larger vehicle cover, check out the Mission Darkness Exodus EMP Faraday Car Cover or contact us for a custom quote.
Exodus EMP Faraday Car Cover
Usage Warning
Special precautions should be taken when inserting the vehicle into the Exodus EMP Faraday Motorcycle Cover. We do not recommend removing the cover frequently (as one might do with a standard unshielded vehicle cover), to reduce the chance of the delicate shielding material (TitanRF Faraday Fabric) becoming tarnished or ripped. The expectation is that a spare vehicle (such as an irreplaceable motorcycle with electric components or emergency doomesday vehicle), will be stored inside indefinitely, opposed to being removed on a regular basis.
DO NOT IDLE GAS VEHICLE ENGINE WHILE INSIDE THE COVER! Only allow vehicle to be turned on for a very short time to slowly and carefully drive it inside the cover. Make sure the opening is expanded to allow ventilation during that brief period.
Do not run any cables through the cover or between the bottom and top layers. Additionally, the rubber floor mat should not go between the bottom and top layers (must remain completely inside of the tent frame). An obtruding object will break the faraday seal, and allow RF signals to penetrate the tent.
The cover should always remain indoors in a dry and protected environment, such as a garage, since it s constructed out of TitanRF Faraday Fabric and does not include additional waterproof weatherproof layers.
{
__shgImageElements : { uuid : s-9d20712d-50cf-463e-acfc-5b4b45891a3d }
}
{
__shgImageElements : { uuid : s-d100d9d1-fc8a-46ab-bfa4-65e986438dc5 }
}
Installation consists of laying the faraday floor base, assembling the metal frame, covering the frame with the fitted top piece faraday cover, then laying a long, flat, weighted object (like wooden planks) around the exterior base rim.
{
__shgImageElements : { uuid : s-7d18eb78-d5cd-4b7b-86d4-1541b69ebea3 }
}
The frame is built out of 1.5 (3.8cm) heavy gauge powder-coated steel with metal corner joints.
{
__shgImageElements : { uuid : s-2b5527ed-4564-449a-8246-ec6f41f9209c }
}
Pole clamps can be used to hold the cover up at a desired height while inserting or removing vehicles.
{
__shgImageElements : { uuid : s-8307af40-1507-4237-8582-4d235f4d907b }
}
{
__shgImageElements : { uuid : s-b6880292-d39c-4e11-ae81-ec43adcfb60e }
}
- Military-grade faraday enclosure specifically designed for shielding motorcycles, electric bicycles, and small vehicles from HEMPs EMPs, CMEs, and RF signals
- Can also be used for shielding extra-large electronics such as satellites, commercial generators, solar panels, and survival equipment
- Constructed with two layers of high-shielding TitanRF Faraday Fabric on all sides (TitanRF Faraday Fabric is lab tested and certified to shielding effectiveness standards MIL STD 188-125 and IEEE 299-2006)
- Blocks WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, and radio signals from low MHz to 40GHz
- EMI, EMR, and EMF shielding
- Seamless construction reduces the risk of ripping from hard pulls (compared to covers made with stitched seams)
- Separate top and bottom layers allows user to easily access vehicle as needed
- Heavy-duty rubber floor mat protects cover from vehicle wheel abrasion and grime
- 1.5 (3.8cm) heavy gauge powder-coated steel frame with metal corner joints provides structure stability and resists chipping, peeling, rust, and corrosion
- Includes TitanRF Faraday Tape and Patches to repair any damage
- Assembled in the USA
- Protection against damaging effects of a high-altitude electromagnetic pulse (HEMP EMP), coronal mass ejection (CME), or related occurrences
- Signal-proof tent for state, local, federal, and military forensics
- Signal isolation for software and hardware testing
- Data security and digital privacy
- EMI RFI reduction
-
- Interior dimensions of the tent once assembled: 8 L x 6 W x 7 H *at the top peak (2.44m x 1.83m x 2.13m)
- Exterior faraday floor base (space required): 10 L x 8 W (3.05m x 2.44m)
-
If you require a larger vehicle cover, check out the Mission Darkness Exodus EMP Faraday Car Cover or contact us for a custom quote.
Exodus EMP Faraday Car Cover
Usage Warning
Special precautions should be taken when inserting the vehicle into the Exodus EMP Faraday Motorcycle Cover. We do not recommend removing the cover frequently (as one might do with a standard unshielded vehicle cover), to reduce the chance of the delicate shielding material (TitanRF Faraday Fabric) becoming tarnished or ripped. The expectation is that a spare vehicle (such as an irreplaceable motorcycle with electric components or emergency doomesday vehicle), will be stored inside indefinitely, opposed to being removed on a regular basis.
DO NOT IDLE GAS VEHICLE ENGINE WHILE INSIDE THE COVER! Only allow vehicle to be turned on for a very short time to slowly and carefully drive it inside the cover. Make sure the opening is expanded to allow ventilation during that brief period.
Do not run any cables through the cover or between the bottom and top layers. Additionally, the rubber floor mat should not go between the bottom and top layers (must remain completely inside of the tent frame). An obtruding object will break the faraday seal, and allow RF signals to penetrate the tent.
The cover should always remain indoors in a dry and protected environment, such as a garage, since it s constructed out of TitanRF Faraday Fabric and does not include additional waterproof weatherproof layers.
{
__shgImageElements : { uuid : s-9d20712d-50cf-463e-acfc-5b4b45891a3d }
}{
__shgImageElements : { uuid : s-d100d9d1-fc8a-46ab-bfa4-65e986438dc5 }
}Installation consists of laying the faraday floor base, assembling the metal frame, covering the frame with the fitted top piece faraday cover, then laying a long, flat, weighted object (like wooden planks) around the exterior base rim.
{
__shgImageElements : { uuid : s-7d18eb78-d5cd-4b7b-86d4-1541b69ebea3 }
}The frame is built out of 1.5 (3.8cm) heavy gauge powder-coated steel with metal corner joints.
{
__shgImageElements : { uuid : s-2b5527ed-4564-449a-8246-ec6f41f9209c }
}Pole clamps can be used to hold the cover up at a desired height while inserting or removing vehicles.
{
__shgImageElements : { uuid : s-8307af40-1507-4237-8582-4d235f4d907b }
}{
__shgImageElements : { uuid : s-b6880292-d39c-4e11-ae81-ec43adcfb60e }
}
Dimensions
Applications